Cold Water revision notes
Loading-unit sizing, storage and accumulators, the Water Fittings Regulations, Legionella control and commissioning.
- 12notes with free previews
- 137questions on Premium
- 5topics
Selection & Sizing
Accumulators and boosted cold water systems
How accumulators meet short peaks and when boosted or pressurised systems are needed.
Sizing cold water pipes by loading units (BS EN 806-3)
How the BS EN 806-3 simplified method uses loading units to turn combined demand into a pipe size.
Sizing cold water storage from demand
Working stored cold water volume from demand and a reserve period, without oversizing.
Regulations, Notification & Info Sources
Design Temperatures & Materials
Commissioning, Disinfection & Faults
Commissioning and the soundness (pressure) test
The commissioning sequence and how the soundness (pressure) test proves the pipework.
Diagnosing cold water defects and handover
A systematic way to diagnose common cold water faults and hand the system over.
Flushing and disinfection (PD 855468 overview)
An overview of flushing and disinfecting a cold water system to PD 855468 principles.
Legionella Control & Maintenance
Separate demand, storage and supply performance
Level 3 cold-water questions often join several decisions: what demand is expected, what the supply can deliver and what storage or protection is appropriate. Keep pressure, flow and stored volume in their own units rather than using one as evidence for all three.
Refresh static head with the water-pressure calculator, then use the Water Regulations guide for contamination and backflow scenarios. A head calculation does not by itself predict the flow available through an installation.
More Plumbing modules
Every module has its own revision notes and question bank.